污水厂计算说明书.docVIP

冯泽宁：贵阳市花溪污水处理厂工艺设计 2014届给水排水工程专业毕业设计（论文） 摘 要 本设计是贵阳市花溪污水处理厂工艺设计。主要任务是完成该污水处理厂初步设计和单项处理构筑设计及再生水处理设计。本项目污水处理的特点：（1）污水以有机污染物为主，BOD/COD=0.6＞0.3，可生化性较好，重金属及其他难以生物降解的有毒有害污染物一般不超标；(2）污水中主要污染物指标BOD、COD、SS值都比较低，属普通城市污水；（3）进水中总磷含量高于污水综合排放标准一级标准，需添加除磷工艺。针对以上特点以及出水要求，现有城镇污水处理技术的特点以采用生化处理最为经济。由于总磷超标，处理工艺尚用除磷。根据处理规模（4万吨/天）进水水质﹑出水质要求，污水处理厂既要求有效地去除BOD5，又要求对污水中的COD磷进行适当处理。 根据原始资料和对出水水质的要求及再生水水质要求选择奥贝尔（Orbal）氧化沟工艺，并进行了构筑物的比选，设计计算、总平面图、高程图的以及构筑物详图的绘制。 关键词：污水处理厂；氧化沟；接触池；再生水 ABSTRACT This design is Huaxi sewage treatment plant process design. The main task is to complete the preliminary design of the sewage treatment plant design and build a single treatment and recycling water treatment design. Features of the sewage treatment project;(1)Organic pollutants in sewage main, BOD / COD = 0.6 0.3, better biodegradability, heavy metals and other hard-biodegradable toxic and harmful pollutants are generally not exceeding;(2)Indicators of major pollutants in wastewater BOD, COD, SS values are relatively low, are common urban wastewater.(3)Total phosphorus content of the influent wastewater discharge standards a higher standard, you need to add phosphorus removal processes. For the above characteristics and water requirements, characteristics of existing municipal wastewater treatment technologies to the use of biological treatment is most economical. Due to excessive total phosphorus, phosphorus treatment process is still used. According to deal with the scale (40,000 tons / day) water quality、the quality requirements, the sewage treatment plant requires both effective removal of BOD5, and requirements for wastewater COD phosphorus for proper disposal. According to the original data and on the water quality of reclaimed water quality requirements and asked to choose Orbal oxidation ditch process，and the selection of structure, design calculation、 general layout、 elevationand construction detail drawing. KEY WORDS：Sewage Treatment Plant；Oxidation Ditch；Contact tank；Recycled water 目录 TOC \o 1-