郭领便携式电能质量检测装置的研究毕业论文二稿.docVIP

毕业论文 题目名称 便携式电能质量监测装置的研究 院 别 电气信息工程学院 专业/班级 电自10101班 学 生 郭 领 学 号 指导教师（职称） 葛延津（教授） 严海领（助教） 摘要 随着国家节约型社会的建设和低碳经济战略的实施，智能化电网的建设成为了此次战略的主战场。电能质量一般是指电压和电流的幅值、频率、波形等参量离规定值的偏差。有时电能质量的不正常会造成严重事故，因此电能质量问题对当前开放型经济体系中的影响日益严重，如何保证优良的电能质量成为一项重要的研究课题。电能质量已是电网可持续发展中一个十分重要的问题。 该课题设计了一种由MCU和DSP双微处理器构成的便携式电能质量测量仪。它是以DSP5410作为运算核心，专门负责采集和处理数据；MSP430作为控制核心，负责人机界面、USB通信及数据储存等辅助功能。此便携式仪器，可以在现场对工频电网中的交流电压电流有效值、电压偏差、功率、功率因数、谐波等主要电能质量参数进行测量及分析。 本文首先介绍了电能质量的概念，电能质量参数的算法实现和其测量方法；然后详细介绍了本测量系统的数据采集模块、MSP430系统模块和DSP系统模块的硬件电路设计及软件流程设计。 关键词： DSP；MSP430；主机接口；谐波 ；电能质量 Abstract Building smart grid becomes the main battlefield of the State Power in the background of the construction of the national saving society and implementation of low-carbon economic strategy. Power Quality generally refers to the amplitude of voltage and current, frequency, waveform parameters such as the deviation from the specified value. Sometimes the unusual power quality can cause serious accidents, so power quality issues in the current open economies growing impact, how to guarantee quality of the power quality is an important research topic. Grid power quality is an important sustainable development issues. This topic has designed a portable hand-held power quality meter composed by the DSP and MCU. DSP5410 as the computing core is responsible for collecting and processing data. MSP430 as the control center is responsible for man-machine interface, USB communications, data storage and other auxiliary functions. The AC power frequency, Vrms, Irms, voltage deviation, power, power factor, and harmonics can be measured and analyzed by this device. This paper firstly introduces the concept of the power quality, the algorithm of the parameters and measured method. And then it introduces the hardware designs and software process designs including data acquisition module, DSP system module and MSP430 system module. Finally, a summary of the system design is made, while the proposed improvements are recommended in