PCBA检验规范讲解课件.docVIP

精品 精品 PCBA检验规范 编 号： 版 本：V1.0 生效日期： 精品 1．修订情况表 修订历史 版本 说明 作者 审核 批准 生效日期 2．术语表 术语表 名称 说明 精品 目 录 TOC \o 1-3 \h \z 1. 目的(Purpose) 1 2. 范围(Scope) 1 3. 名词解释(Words explanation) 1 4. 参考文件(Reference document) 1 5. 职责(RESPONSIBILITY)…………………………………………………………………… ….……………1 6. 作业流程及内容(Flow chart and content)……………………………………………………………..….1 7. 修订权限(AUTHORITY OF MODIFICATION)………………………………………………………………2 8. 附件(ATTACHMENT)………………………………………………………………………………………….2 8.1 附件一(PCBA)……………………………………………………………………………………...4 8.2 附件二(机构类)…………………………………………………………………………………….42 8.3 附件三(其它)……………………………………………………………………………………….52 PCBA检验规范 目的(Purpose) 建立产品外观目视检验标准, 使产品检验之判定有所依循, 同时藉由检验资料的回馈分析建立良好的workmanship,防止不良之发生. To establish the standard inspection of product cosmetic for operation to follow, and establish well workmanship by feedback and analyzing the inspection document to void failure. 范围(Scope) 本规范适用于所有产品(含半成品及成品PCBA)的外观目视检验, 包含自行生产制造之PCBA, 委托外包生产制造之PCBA, 以及外购入厂组立或单独包装出货之PCBA等. It fits all product(containing product and PCBA) appearance inspection, including PCBA made by self or by other company and other. 名词解释(Words explanation) 无(None) 参考文件(Reference document) ANS/IPC-A-610D 职责(Responsibility) 生产单位(Production unit):负责产品检验之执行.Be responsible for doing product inspection 质量管理部(Quality unit):负责产品规格之制定及产品品质之抽样检验管制Be responsible for making product specification and controlling the spot check of product quality 作业流程及内容(Flow chart and content ) 6.1检验前的准备(preparation for inspecting): 检验前须先确认所使用的工具,材料,胶,清洁剂等,是否合乎规定. 检验PCBA 时必须配戴防静电手套或防静电手环, 而成品有外壳部分则不在此限. Before inspecting, be sure of the tool, material, glue, cleanser, etc. Operator should have wrist strap or electrostatic glove for prevention ESD(Electronic static Discharge ), but the finished good with。 6.2 若有检验标准未规范的异常现象发生时，不代表该产品允收或拒收，应向值班工程师询问。It is not means the product accept or reject that the standard of inspection have some abnormal , but should fe