聚乙烯工艺描述英文.docVIP

UNIPOL PE Process Description UNIPOL PE工艺描述  Table of Contents PROCESS DESCRIPTION 1.1 Contract Plant Composition 1.1.1 PE Process Unit 1.1.2 Supporting Facilities 1.1.3 Auxiliary Facilities 1.2 Process Introduction 1.2.1 Description of PE Process Unit 1.2.2 Description of Supporting Facilities 1.2.3 Description of Auxiliary Facilities 目 录 工艺描述 1.1 装置组成 1.1.1 PE 工艺单元 1.1.2 配套设施 1.1.3 辅助设施 1.2 工艺介绍 1.2.1 PE 工艺单元描述 1.2.2 配套设施描述 1.2.3 辅助设施描述 1.1 Contract Plant Composition The Contract Plant produces 300,000 TPY of pelleted Linear Low, Medium, and High Density Polyethylene from ethylene, which may involve the addition of a comonomer (butene-1 or hexene-1) for some Products. The Contract Plant Battery Limits is represented in the diagram provided in Attachment 11 of this Appendix. The Contract Plant consists of the following systems. 合同装置组成 本合同装置是用乙烯为单体，可能会引入丁烯-1 或己烯-1 为共聚单体来生产高、 低、中密度聚乙烯树脂的装置，产能为30 万吨/年。合同装置界区范围见本附件的附录1- 1。本合同装置由下列系统组成： 1.1.1 PE Process Unit The PE Process Unit utilizes Univation Technologies’ UNIPOL? PE Process, a low pressure gas phase polymerization process, and includes the following process systems: ? Raw Material Supply and Purification ? Ethylene Purification ? Reaction (includes catalyst handling and feeding) ? Resin Degassing ? Vent Recovery ? Seed Bed System ? Resin Additive Handling ? Pelleting 1.1.1 PE 工艺单元 PE 工艺单元采用 Univation 技术公司的 UNIPOL 聚乙烯技术，这是一种低压气相聚合工艺，包括下列工艺系统： --原料供给和精制 --乙烯精制 --反应 （包括催化剂处理和进料） --树脂脱气 --排放气回收 --种子床系统 --树脂添加剂处理 --造粒 1.1.2 Supporting Facilities The Supporting Facilities for the PE Process Unit include the following process systems: ? Resin Handling System 1.1.2 配套设施 PE 工艺单元的配套设施包括下列系统： --树脂处理系统 1.1.3 Auxiliary Facilities The Auxiliary Facilities for the PE Process Unit include the following process systems: ? Steam and Condensate Recov