第3章防排烟系统.pptVIP

（２）排烟口的平面位置应按以下两个规定： 每个防区面积按500m2划分； 防区内任何地点到排烟口水平距离小于30m，如图所示。 ２.机械排烟系统的组成 该系统是使用排烟风机进行强制排烟。由挡烟（活动式或固定式挡烟壁，或挡烟隔墙、挡烟梁）、排烟口、防火排烟阀门、排烟道、排烟风机和排烟出口组成。如图所示。 * A LonWorks flat architecture includes LNS and does not require a gateway between the field devices and the HMI. A flat architecture is a “no gateways” architecture. Using a gateway defeats interoperability and the vendor independent nature of the LonWorks technology. * A flat architecture is a “no gateways” architecture. Using a gateway defeats interoperability and the vendor independent nature of the LonWorks technology. * 建筑消防工程 防