小型玉米秸秆收割机仿真和试验.PDFVIP

() 2015 10 41 5 Journal of Hunan Agricultural University (Natural Sciences), Oct. 2015, 41(5):549–553 DOI:10.13331/ki.jhau.2015.05.018 小型玉米秸秆收割机的仿真与试验 1a 1b* 2 1b 1b 1b (1. a.b. 730070 2. 730101)   摘 要 SolidWorks ADMAS 5 J 1.547×10 3 858 N s 1.76 cm 95.59%5.10 hm2/h 关 键 词 + 中图分类号S225.5 1 文献标志码：A 文章编号：1007− 1032(2015)05−0549−05 Simulation analysis and test of the small maize straw harvester 1a 1b* 2 1b 1b 1b Zhang Tao , Zhang Fengwei , Wang Lijuan , Shi Linrong , Dai Fei , Zhao Wuyun (1.a.College of Agronomy, b.College of Engineering, Gansu Agricultural University, Lanzhou, Gansu 730070, China; 2.Bowen College, Lanzhou Jiaotong University, Lanzhou, Gansu 730101, China) Abstract: Aimed at the problems in small and scattered corn field, i.e. mainly manual harvest, labor intensity, low productivity in gansu area, the small grain corn stalk harvester is designed and developed, which mainly composed of the transmission system, the cutting device and the grain lifer. Using SolidWorks and ADMAS virtual simulation the whole machine to get harvester performance indicators, and the corn straw harvest experiments are conducted on double ridge sowing fully-mulching dry land. The result show that the total kinetic energy of harvester cutting device axis is 1.547×105 J, and the total impulse is 3 858 N·s. Under the condition without to clear mulch and weeds, the average stubble height is 1.76 cm, and the corn straw qualified rate is reached 95.59%, as well as the device operating coordinatedly, stablly and reliablly. The avera