基于labview的英文文献.docVIP

中北大学2013届毕业设计说明书英文文献及中文翻译 第 PAGE 1 页 共 NUMPAGES 10 页 Electric Measurements with LabVIEW Dambovita Abstract: The paper presents a data acquisition system which consists in Hall effect sensors, a PCI 6023(National Instruments) data acquisition board, Lab VIEW graphical programming environment and the experimental results achieved by the authors concerning the behavior of ac electrical circuits. The instruments used in the measurement technique were developed as computer data base equipments, using well determined functions (the acquisition of parameters, signal processing/adapting) with the communication possibility on a serial interface or on a parallel port. Today, data acquisition boards are used and can be assembled directly into the computer, having the operation possibility of an oscilloscope. The appearance of the LabVIEW environment was motivated by the research automation activity and by the application development, based on a hierarchical instrument structure, which is composed by the users interface and the visual programming elements. Keywords：data acquisition, graphical programming, Hall effect, electric power 1 Introduction The use of the LabVIEW graphical programming environment ensures the analysis and study of power measurement methods in single-phase and three-phase alternative current circuits [3, 6, 7]. The evolution in both electric measurement technique, in the electronic field and in the area of data acquisition systems, arguments the opportunity and justification of designing new instruments in order to improve the research activity in this area [2, 3]. The modern applied metrology is integrally linked with other fast-growing domains, such as computer technology, data processing and telecommunications. Adaptation of the information systems’ techniques for the needs of measurement systems created a new interdisciplinary field dealing with Distributed Measurement-Control Systems (DMCS). Elements of DMCS (nodes) are distributed territoriall