陶瓷喷完学习资料.pptVIP

陶瓷弹丸喷完的性能 Peening with Zirshot? Why using Zirshot? High performance ceramic material allows to exceed performance limits of pre existing metallic or glass shots. This brings advantages in technical performance, industrial efficiency and improvement in work conditions and environment care. Summary Zirshot characteristics and behaviour, Peening of Titanium, Peening of Aluminium, Peening of High strength steel. Media cycling modeSteel shot, Dust Generator Media Cycling modeZirblast?, Dust Prevention, Work Load Consistency Stable Aspect in Industrial Use Stable in Industrial Use Advantage: Process Speeding up Advantage: Improved Energetic Efficiency Advantage: Less Wearing on Equipment Advantage:Better surface condition, 54SiCrV6 Double Peening with steel shot Double peening Steel shot Zirshot? Single peening Zirshot? only Advantage: Better surface condition,Stainless Steel 316 Ti Zirshot? on Aluminium Alloys Zirshot? onAluminium 2214 T6 Alloy Zirshot? on High strength steel 300 M Lab results for current hardness valuesCk 45 steel, hardened 665 HV10 Lab results for high hardness values  Case hardened steel 16MnCr5, 1060 HV 0,2 Zirshot?, Very good surface condition can be achieved, even for deep affected layer Residual stress at the surface is decreasing when stored elastic energy is growing Zirshot?, Application to Case Hardened Transmission Gears Zirshot?, Industrial application on automotive precision springs Challenge Increase durability and reliability of highly stressed compression and torsion springs. First step on sample springs Encouraging results Development on actual springs Develop full scale production process that would insure repeatable results Results on actual coil springs Spring data, Material Oteva 75SC, Wire diam. = 4.88 mm, OD = 44.5 mm. Test data: Applied load between 63 and 1079 N/mm2. Results on actual coil springs For 90% reliability, Single peening with Zirshot is providing equivalent or slightly superior lifetime vs. doub