浇注系统设计讲课资料.pptVIP

矩形邊緣澆口設計 Rectangular Edge Gate Design L = 0.5 ~ 0.75 mm W = 澆口寬度 ( mm ) gate width in mm A = 型腔表面積 ( mm2 ) surface area of cavity in mm2 n = 材料常數 material constant 0.6 for PE, PS 0.7 for POM, PC, PP 0.8 for CA, PMMA, PA 0.9 for PVC h = n t h = 澆口厚度( gate thick. in mm ) t = 零件壁厚( wall thick. in mm ) W t L h 冷氣通風飾罩-原始設計 Air-conditioner Grille - Original 18 gates pressure: 76 MPa 冷氣通風飾罩-修正設計 Air-conditioner Grille - Revised 8 gates pressure: 75 MPa 分析結果比較表 Comparison of Analysis Results 十二澆口設計 12 Gate Design 原始設計 Original Design 電子零件置物箱