《钢坯火焰清理机设计》-毕业设计（论文）.docVIP

需图纸找QQ251133408 PAGE 5 摘要 钢坯火焰清理(searfing of billet)利用高温火焰的 气割和熔除 作用将 钢坯 表面缺陷烧除。在钠坯 生产中，它是 保证钢坯 质量的重要工序。 火焰清理是一种生产率高、 成本低的 表面清理方法。用火焰清理1t钢坯的成本比用 风铲清理便宜一半以上，为 砂轮 磨削的十分之一。清理 速度比风铲高10 ~15倍，广泛用于 碳钢、 低合金钢及 部分 合金钢的清理。火焰清理有人工清理和 机械清理，可进行在线热清理及 钢坯冷却后的补充清理。 人工火焰清理通常用作钢坯的冷清理，但对于一些导热性差的 高碳钢及合金钢钢坯，一般不适用于常温清理，通常在钢坯未冷却到150~300°C之前进行人工抢温清理。(人工火焰清理的工具为带引火器的火焰枪，清理时喷嘴在钢坯表面上 移动速度为6~9m/min)。 机械火焰清理为改善钢坯表面质量和减轻繁重的手工 操作，在初 轧机和大剪机之间的生产线上安装 火焰清理机(又称在线火焰清理机)，将轧后的钢坯在热状态下同时进行四面(方坯)或两面(板坯)的在线火焰清理。一般一次清理深度为0.8~4.2mm，清理速度是可调的。经在线热清理的钢坯表面仍有10%~40%的清理量要在钢坯库进行补充冷清理，其中中碳钢约占10%，合金钢约占40%。 关键词： 钢坯表面 火焰清理 改善 质量 Abstract Searfing flame of billet clear (the billet) with high-temperature flame cutting and melt in addition to burn surface defect role will billet except. In sodium billet production, it is to guarantee the important process quality of steel. Flame cleanup is a kind of productivity high, low cost surface cleaning method. Use flame 1t billet cost clear with FengChan cleaning cheaper than more than half, for grinding wheel grinding tenth. Cleaning faster than FengChan high 10 ~ 15 times, widely used in carbon steel, low alloy steel and part of the alloy steel cleanup. Flames are artificially clean and clear mechanical cleaning, can undertake online hot cleaning and billet supplementary after cooling cleaning up. Artificially flame clean commonly used as billet cold clear, but for some poor thermal conductivity of high carbon steel and alloy steel billet, generally does not apply to clean, usually at the billet not cooled to 150 ~ 300 ° C temperature artificial rob before cleaning up. (artificially flame cleanup tools for the flame with lead firearm gun, when clearing nozzle movement speed on the surface of the billet for 6 ~ 9m/min). For improving mechanical flame cleaning the surface quality and reduce billet heavy manual operation, in the beginning mills and large shear machine production line between install flame cleaning machine (also called online flame cle