UP2000-96风电机组现场安装指导（机械部分）.pdfVIP

GA-20.01-00.00.00.00-A-B Important Notice and Disclaimer This document may still be undergoing checking by the institution responsible, unless approval has been given with appropriate notification appearing on the document. Although all work has been carried out very thoroughly, this document is still subject to changes. The risk of manufacturing in accordance to this document or any other use of the results stays exclusively with the customer and is not in the responsibility of GDUPC. Should any information in this document be not complete, incomprehensible or faulty, it is the responsibility of the user of this document to immediately clarify the facts with the author and the client. Upon the use of this document the user agrees that GDUPC can only be held responsible for intent and gross negligence and that liability for consequential damage is impossible. This document is only submitted under the assumption that the receiver accepts the above conditions. Revision Summary Revision Date Description of modification A 2010-10 1st B 2012-08 2nd 风电机组现场安装指导 Page 2 / 37 GA-20.01-00.00.00.00-A-B 目录 1 目的 5 2 适用范围 6 3 职责 7 4 安装条件 8 4.1 对风场的要求 8 4.2 安装的天气要求 8 4.3 安装的力矩要求 8 4.3.1 螺栓连接，本指导中涉及的所有螺栓的准备 8 4.3.2 将要被螺栓紧固在一起的部件的准备工作： 8 4.3.3 没有用液体螺栓锁紧介质加以安全保护的螺栓的准备： 9 4.3.4 对于使用液体螺栓锁紧介质加以安全保护的螺栓的准备： 9 5 缩写和符号 10 5.1 缩写列表： 10 5.2 技术符号： 10 5.3 安全提示符号： 10 6 工作区间布置 12 7 基础法兰的检查 13 7.1 清洁基础的所有表面 13 7.2 检查基础法兰的表面和水平度 13 7.3 清理