UP3000-100陆上型风机振动传感器配置文件下载说明.pdfVIP

GA-30.1-EC.CM.00.01-A-A Important Notice and Disclaimer This document may still be undergoing checking by the institution responsible, unless approval has been given with appropriate notification appearing on the document. Although all work has been carried out very thoroughly, this document is still subject to changes. The risk of manufacturing in accordance to this document or any other use of the results stays exclusively with the customer and is not in the responsibility of GDUPC. Should any information in this document be not complete, incomprehensible or faulty, it is the responsibility of the user of this document to immediately clarify the facts with the author and the client. Upon the use of this document the user agrees that GDUPC can only be held responsible for intent and gross negligence and that liability for consequential damage is impossible. This document is only submitted under the assumption that the receiver accepts the above conditions. Revision Summary Revision Date Description of modification A 2012-05-30 First Version UP3000-100 海上型风力发电机组振动传感器（PCH ）配置文件下载说明 Page 1/5 GA-30.1-EC.CM.00.01-A-A UP3000-100 双馈式海上型/潮间带型风力发电机组 振动传感器（PCH ）配置文件下载说明 一、说明 本说明文档适用于3MW50HZIIA 海上型、潮间带机型所用PCH 配置文件下 载、升级。其他机型配置文件下载方法可参考本文档，但配置文件中各参数需要 重新设定。 配置文件随本文档一同下发。 二、下载步骤 1. 使用串口线连接PCH 与电脑。 UP3000-100 海上型风力发电机组振动传感器（PCH ）配置文件下载说明 Page 2/5 GA-30.1-EC.CM.00.01-A-A 2. 点击 “Setup”- “Monitor parameters…”。 3. 点击“Open”。 UP3000-100 海上型风力发电机组振动传感器（PCH ）配置文件下载说明 Page 3/5 GA-30.1-EC.CM.00.0