AD7606在电机控制系统中的应用与设计.PDFVIP

第9 卷第20 期 Vol.9 No.20 2016 年 10 月 October 2016 AD7606 在电机控制系统中的应用与设计 林明耀，何春晓，顾卫钢* （东南大学电气工程学院，南京 210096 ） 摘要：在以 DSP 为核心的电机控制系统中，为实现系统的实时控制和稳定，主电路中的电压量和电流量会通 过有隔离效果的传感器进行处理，之后通过相应的调理电路送入DSP 的A/D 采样引脚。鉴于 DSP 片内A/D 采样模块在量程设计与抗扰能力上的不足，这里以TI 公司的TMS320F28335 为例，设计AD7606 采样芯片的 外围硬件电路，设计 3 组实验，从采样数据的准确度、精密度和采样信号的类型 3 个方面验证采用外扩采样 芯片的合理性和高效性，并对实验结果进行分析。 关键词：电气工程；电机控制系统；TMS320F28335；AD7606 ；硬件设计 中图分类号：TM306 文献标识码：A 文章编号：1674-2850(2016)20-2079-07 Application and design of AD7606 in electric machine control system LIN Mingyao, HE Chunxiao, GU Weigang (School of Electrical Engineering, Southeast University, Nanjing 210096, China) Abstract: In order to realize the real-time control and stability of the system which is based on DSP, the voltage and current of the main circuit required would be sampled by sensor which has the effect of isolation, and then the signals would be sent into the A/D pins on the DSP through matching conditioning circuits. For the DSP’s on-chip A/D module has its disadvantages in designing range and immunity ability, in this paper, the hardware circuit of AD7606 was designed for TI’s TMS320F28335. In order to verify the rationality and efficiency of the sampling chip, three different experiments are designed for the comparison between these two signal processing methods in the following aspects: the accuracy of sampling data, the RSD of sampling data and the genres of sampling signal. According to the consequences, analysis has been given. Key