AMS 5936 D 国外国际英文.pdf

AEROSPACE AMS5936 ™ REV. D MATERIAL SPECIFICATION Issued 2001-04 Revised 2019-03 Superseding AMS5936C Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 11Ni - 1.7Ti - 1Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable (Composition similar to UNS S46500) RATIONALE AMS5936D revises chemical analysis standards (3.1), condition (), prohibits unauthorized exceptions (3.8), revises reports (4.4) and identification (), and results from a Five-Year Review and update of this specification. 1. SCOPE 1.1 Form This specification covers a corrosion-resistant steel in the form of bars, wire, forgings, and forging stock. 1.2 Application These products have been used typically for heat-treated parts requiring stress corrosion resistance, along with a combination of high strength and high toughness up to 800 °F (427 °C) with good ductility and strength in the transverse direction, but usage is not limited to such applications. 1.2.1 Certain design, processing procedures, or environmental conditions may