浅埋地下结构浮力模型试验研究.doc

  1. 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
  2. 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  3. 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
浅埋地下结构浮力模型试验研究 向 科,周顺华,詹 超 (同济大学 道路与交通工程教育部重点试验室,上海 201804) 摘 要:针对浅埋地下结构浮力试验的特点,研制了一套直接测定静水中结构底板所受浮力的模型试验系统。根据纯水中扬压力等于静水压力,确定了主要系统参数。利用该系统,对不同埋深下纯水、饱和砾石、中砂、细砂、粉土和黏性土中模型室底板受到的浮力及孔隙水压力进行了测试。试验结果表明,该系统在纯水中浮力测试的最大误差小于1%。饱和砾石、中砂、细砂和粉土中模型室底板所受浮力比其在相同条件下的纯水中受到的浮力小约5%,而饱和黏性土中模型室底板所受浮力与其在相同条件下的纯水中受到的浮力相等。饱和粉土和黏性土在填筑过程中,底板所受浮力极大,并可能超过被其排开的饱和土的重量,且测压管水头在填筑过程中均超过填土面高度,埋置越深的测压管水头越高。长期稳定状态下,饱和无黏性土和黏性土中各测压管中水头高度均与填土表面齐平。 关键词:浮力;扬压力;孔隙水压力;地下结构 中图分类号:TU46 文献标识码:A 文章编号: Model test study of buoyancy on shallow underground structure XIANG Ke, ZHOU Shunhua, ZHAN Chao (Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University, Shanghai 201804, China) Abstract: According to the features of the test of buoyancy on shallow underground structure, a model test system which directly determines the hydrostatic buoyancy on the bottom-board of the structure was developed. Main system parameters were determined based on the principle that the uplift pressure equals the hydrostatic pressure in pure water. The buoyancy on the bottom-board of the model cellar at different embedded depth in pure water, saturated gravel, medium sand, fine sand, silt and clay were determined by the system, as well as the pore pressure. The test results showed that the system’s maximum error rate of pure water buoyancy test was less than 1%. The buoyancy on the bottom-board in saturated gravel, medium sand, fine sand and silt were about 5% less than that in pure water, whereas the buoyancy in saturated clay was equal to that in pure water. During the filling of saturated silt and clay, the buoyancy was so great that it may exceed the weight of the displaced saturated soil. During the process of filling, the water heads of all piezometers were higher than the surface of the soil. Moreover, the deeper the piezometer was ebedded, the higher the piezometric head would be. At the long-term stable state, the water heads of all piezometers in clay and nonclays were exactly as

文档评论(0)

xiaozu + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档