卧轴矩台平面磨床操作作业书.docxVIP

地址：江苏省太仓市科教新城健雄路1号 邮编：215411 中德培训中心 Add：No.1 Jianxiong Road,S＆E New Town,Taicang Jiangsu 215411 AHK-Chien Shiung Training Center Phone:+86 512 Fax +86 512 卧轴矩台平面磨床操作作业指导书 Horizontal Face Grinding Operation Instruction 编号：ZD-QC-A17-2012 版次： A/0 Protective ShoesProtective Protective Shoes Protective Cap Protective Goggles Protective Clothes 1. 作业员着装合格 Make sure you wear the suitable uniform to keep safe 卧轴矩台平面磨床操作作业指导书Horizontal Face Grinding Operation Instruction 1/5 2. 开启总电源 Turn on the main power 3. 清理工作平面 Clean the work surface 4. 摆放工件（零件必须没有毛刺） Place the workpieces. (burr is not allowed on it) 5. 砂轮要高于工件表面 Grinding wheel above the workpiece surface 6. 打开电磁吸盘充退磁旋钮 Turn on the hydraulic start button 7. 启动液压启动钮 Turn on the hydraulic start button 8. 将砂轮向外移动 The wheel moves outward 9. Y轴进给，使砂轮1/3在工件上 Feed manually through Y axis to have 1/3 part of grinding wheel get out of work piece 卧轴矩台平面磨床操作作业指导书Horizontal Face Grinding Operation Instruction 2/5 10. 调节X轴摆动行程 Adjust X axis swinging route 11. 启动砂轮 Turn on the grinding wheel 12.工作台(X轴)往复移动换向摇杆打到左 Bench （X axis） reciprocating reversing rocker hit to left 13. 手动进行对刀和调整 Manual tool setting and adjustment 14. 对刀磨出微小火花 cutter grinding Tiny spark 15. 手动Y轴，磨削一个行程 Feed manually through Y axis to grind a stroke 16. 调节Z轴进给量5~20um Adjust Z axis feed rate 5~20um 17. 调到自动进给 Adjust automatic feed mode 卧轴矩台平面磨床操作作业指导书Horizontal Face Grinding Operation Instruction 3/5 18. 启动横向进给向里运行钮 Transverse feed run button to start 19.磨削 Grinding 20．工作台停止往复移动换向（砂轮应停在工作台左面，且不应停在工件表面）Bench stop reciprocating for reversing(Grinding wheel should be stopped at stage left, and should not stop at the surface of the workpiece) 21．手摇砂轮退出 The wheel exit for hand 22．关闭自动进给 Turn off automatic feed mode 23．关闭砂轮 Turn off grinding wheel 24．关闭液压停止钮 Turn off the hydrauli