SAEAMS5678F-2002(R2013) 汽车标准下载.pdf

AEROSPACE MATERIAL AMS5678 REV. F SPECIFICATION Issued 1975-06 Revised 2002-11 Reaffirmed 2013-10 Superseding AMS5678E Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1Al Cold Drawn, Precipitation-Hardenable (Composition similar to UNS S17700) RATIONALE AMS5678F has been reaffirmed to comply with the SAE five year review policy. 1. SCOPE: 1.1 Form: This specification covers a corrosion-resistant steel in the form of wire, cold drawn to Condition C and capable of being precipitation heat treated to Condition CH900. 1.2 Application: This wire has been used typically for springs requiring corrosion resistance and resistance to permanent set up to 600 °F (316 °C), but usage is not limited to such applications. Where parts require welding during fabrication, strength of this cold-drawn wire will be impaired. 2. APPLICABLE DOCUMENTS: The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequen