《内齿轮铣齿机总体结构的计算机辅助设计》-毕业论文（设计）.docVIP

河南科技大学毕业论文 精品 - PAGE II - 内齿轮铣齿机总体结构的计算机辅助设计 摘　要 运用计算机辅助设计技术对内齿轮铣齿机总体结构进行设计可以促进企业的设计效率、优化设计方案和产品设计标准化水平的提高，缩短了产品的设计周期，减轻了设计人员的工作强度并且降低了设计成本。本课题主要研究内容如下： 对各种不同机床的总体结构进行深入剖析。 对内齿轮铣齿机的总体结构进行三维造型的方案论证，运用Pro/e设计机床底座和机床总体结构的三维造型。 运用AutoCAD绘制机床底座零件图、机床总体结构装配图和机床底座滑台装配图 本课题运用AutoCAD和Pro/e技术进行内齿轮铣齿机总体结构的平面设计和三维设计，可以缩短产品开发周期，提高产品质量，降低成本，增强企业的市场竞争能力。 关键词：内齿轮铣齿机， CAD，三维造型，底座，总体结构 Annular gear gear cutter overall structure computer-aided design ABSTRACT Carries on the design using the computer-aided design technology to the annular gear gear cutter overall structure to be allowed to promote enterprises rated capacity, Optimization design proposal and product design standardization level enhancement, Optimization design proposal and product design standardization level enhancement, Reduced has designed personnels working strength and to reduce the design cost. This topic main research content is as follows: (1) Carries on the thorough analysis to each kind of different engine bed overall structure. (2) Carries on the three dimensional modeling to the annular gear gear cutter overall structure the plan proof,Using Pro/e design engine bed foundation and engine bed overall structure three dimensional modeling. (3) In the Windows platform, utilizes the Pro/e design engine bed foundation and the engine bed overall structure three dimensional modeling,And Engine bed foundation assembly drawing This topic carries on the annular gear gear cutter overall structure using AutoCAD and the Pro/e technology the plane design and Improves the product quality,the three dimensional design, May reduce the product development cycle, Reduces the cost, Enhancement enterprises market competition ability. KEY WORDS：annular gear gear cutter, CAD, three dimensional modeling，foundation，overall structure. 精品 - PAGE IV - 目　　录 TOC \o 1-3 \h \z 前言 1 第一章 绪论 1 §1.1计算机辅助设计概述 1 §1.2计算机辅助设计的现状及发展趋势 2 §1.3 国内CAD技术的发展 4 §1.4 国外CAD技术的发展 5 §1.5 本课题完成的主要工作 7 第二章 内齿轮铣齿机总体结构方案的选定 8 §2