手袋箱包外贸QC通用标准--case-and-bag.docxVIP

This document specifies the general quality requirements for “Sleeping Bag” and other similar products. It is used as a general guideline for inspection if clients have not defined their requirement. 此文件为针对箱包及类似产品验货的通用标准。如果客户没有特别的要求，在此定为通用的验货指南 Inspection Criteria of Product / Package 产品/包装验货标准 Product: 产品 Must be without any unsafe defect for using; 不允许有在实际使用中任何对使用者造成伤害的缺陷； Should be free of damaged, broken, scratch, crackle etc. Cosmetic / Aesthetics defect; 不应有任何损坏，破碎，擦伤，或碎裂等外观缺陷； Must be conform to the shipping market legal regulation / client’s requirement; 必须符合销往国当地的法规以及客户的要求； The construction, appearance, cosmetics and material of all units should comply with client’s requirement / approved samples; 产品的结构，外观，材料等必须符合客户的要求或与样品保持一致； All units should have full function complying with client’s requirement / approved samples; 产品功能必须符合客户的要求或与样品保持一致； The marking / label on unit should be legal and clear. 产品上的标记/标签必须符合法规要求且清晰明确。 Package: 包装 All units will be adequately packaged, and constructed from suitably robust materials, such that it arrives in store in a merchantable condition; 产品要有足够强度的材料构成的充分包装，使得货物以可销售的状态到达目的仓库； The packaging material can protect the goods from damage during transportation; 在运输过程中，包装材料能防止货物受损； The shipping mark, bar code, label (such as price label), should conform to client’s spec. and/or approved samples; 箱麦，条形码，标签（例如：价格标签）应符合客户的要求或与样品保持一致； The package should comply to client’s requirement / approved samples; 包装必须符合客户的要求或与样品保持一致； Text of illustration, instruction, label and warning statement etc. must be clearly printed in user’s language; 图解，说明书，标签，警告声明等应清晰地印有使用者语言； The illustration and instruction on the packaging must conform to the product and its actual performance. 包装上的图解和说明书必须与实际产品及其功能保持一致； The method and material of pallet/crate etc. should be approved by client. 栈板/板条箱包装的材料及方式必须经客户批准 3. Inspection Plan Defects classification检验计划及缺陷分类 Sampling procedure Defects Definition, please refer t