AOR_ARCC8200_接收机使用手册.pdf

® RS232 protocol listing for the AR8200 (accompanies the CC8200) Documentation release V1.3 Every effort has been made to make this manual correct and up to date. Due to continuous development of the product and by error or omission anomalies may be found and these are acknowledged. This manual is protected by copyright AOR LTD 1998. No information contained in this manual may be copied or transferred by any means without the prior written consent of AOR LTD. AOR and the logo are trade marks of AOR, LTD. All other trade marks and names acknowledged. EOE. © 1998 AOR LTD. Japan. Index 1 General 1 2 Supplied accessories 1 3 Connection for RS232 operation 1 4 Use of Microsoft Terminal Hyper Terminal 2 5 How to send a command 5 6 Command index 5 7 Detailed command list 6 8 AOR control software 18 9 Acknowledgements 18 10 Contact details 18 (1) General The AR8200 is designed to be connected to a computer using the optional CC8200 lead with built-in level shift conversion, this will enable computer control via the RS232 serial port of a computer. An additional piece of software will usually be required in order to address the computer’s serial port with the correct set of parameters. If using an IBM-PC or clone (with 80386 processor or higher) Microsoft Hyper Terminal (or WINDOWS TERMINAL on Windows 3.1x) may be used to address the computer’s serial port. In order to gain the greatest flexibility, a specialist software package is desirable. For this reason a Windows based PC package is supplied FREE on the CD-ROM accompanying the CC8200 (this may also be made available from the AOR web site WWW.AORJA.COM). For those wishing to compile their own software (for computers other than the PC etc) or for basic terminal control, please refer to