冷库自动门调试步骤.docVIP

PAGE PAGE 8 Electric door controller LYCD-075-02 Manual 目录 TOC \o 1-3 \h \z \u 1. Debug step： 3 2. Specification: 3 3. Panel instructions： 4 4. Code the remote control： 4 5. Alarm?Processing: 5 6. Terminal definition： 5 7. Parameter Description： 6 8. Schematic： 8 Debug step： 1.1 Step 1: First, please insure that the pins of motor and encoder are well connected to the controller. Tighten the screws of encoder connector. Confirm all of the external lines such as power and input signals. And then move the door to middle（make sure that the door is not in opened or cl