workbench电机电磁场有限元分析.pptxVIP

Work Bench EnvironmentLow Frequency Electromagnetic Analysis of MotorsMotor Analysis in the Workbench EnvironmentUpon entering the workbench environment, read in the design modeler geometry stored in motor2_base.agdb.1210/1/2004Motor Analysis in the Workbench EnvironmentYou should see an end view of the motor geometry. Using the left mouse button (LMB) click on the blue dot adjacent to the triad in the lower right corner of the plot. This should result in the isometric view shown at right.The image can be dynamically rotated as follows:Position the mouse cursor on the displayHold down the midd