欧盟压力容器标准EN分析设计标准综述.pptVIP

1） 材料本构关系线弹性理想塑性本构关系； 2） 服从tresca屈服准则（最大切应力准则）和相关联流动准则； 3） 设计强度参数按照相关规定； 4） 部分安全系数按照相关规定； 5） 对所有载荷的按比例增加和无应力初始状态的无应力集中模型，主结构应变的最大绝对值应当小于 ——5% 正常操作载荷工况 ——7% 试验载荷工况 Dear Mr Wenxian,The 5% are from a purist point of view arbitrary. Mainly we wanted a unique answer for a DBA performed by different people, with different software, different patience etc. In our first draft we did use the tangent intersection approach - i.e. we used as design value for what we then still called resistance the value of the action corresponding to the intersection of the tangent in the elastic regime and the tange