达胜热缩套技术参数表heat shrinkable sleeve.docVIP

Contact Person:Ronny Wang Tel: 86-136******** Email: ronny@ W S S50WRAPAROUND SHRINK SLEEVE For joint coating of pipelines PRODUCT DESCRIPTION Dasheng’s WSS 50 sleeves consist of a radiation cross-linked heat shrinkable backing, coated on the inside with a heat activated adhesive. While the modified polyethylene material of the backing offers superior mechanical protection, the specially formulated adhesive offers excellent corrosion protection under demanding conditions. As 2 PE system, it is convenient for construction. The system is suitable for most of the common pipeline coatings like PE, PP, FBE etc. SPECIFICATIONS Property Test Method WSS 50 (Mastic Application temperature 60oC Operating Temperature Up to 50oC Backing Tensile Strength ASTM D638 2,900 psi Elongation ASTM D638 550% Hardness, ShoreD ASTM D2240 48 Shrink Force ASTM D638 35 psi Dielectric Strength ASTM D149 20kV/mm Volume Resistivity ASTM D257 1x 1016Ω-cm Water Absorption ASTM D570 0.05% (Wt Adhesive Softening Point ASTM E28 78oC Lap Shear ASTM D1002 140 N/cm2@23oC Lap Shear DIN EN 12068 32 N/cm2@60oC Installed Product Peel Strength DIN EN 12068 65 N/cm @ 23oC Impact Resistance DIN EN 12068 Pass Indentation Resistance DIN EN 12068 Pass Cathodic Disbandment DIN EN 12068 15mm rad. Resistance to thermal Ageing -Tensile strength ratio -Elongation ratio DIN EN 12068 After 100 days @ 80oC 0.9 0.9 RANGE APPLICATION GUIDE Standard manufacturing range covers the following sizes and dimensions: Dimension Range Sleeve width Up to 720mm Backing thickness (recovered 1.0mm to 1.5mm Adhesive thickness 0.8mm to 2.0mm Roll length 10M, 15M 30M PACKING DELIVERY WSS 50 Sleeves can be delivered as kits or in roll form. Each factory assembled kit will consist of one sleeve, suitable for a particular pipe size, a separate closure seal. In the event of ordering sleeve rolls and closure seals. COATING REPAIR MATERIALS Repair Patch, Melt Stick Mastic Filler are available separately. Please enquire with us. SLE