电器外壳建模实例.pptVIP

October the 25th 2001 Functional Modeling  Demonstration Script Scenario The aim of the demonstration is to design a part using the new Functional Molded workbench. This demonstration is available with CATIA V5 R12. Enter the Molded Part Design Workbench. Switch to the Molded Part Design Workbench. Go to Reserved Space. Style Specifications consist in a Extrude cut . To obtain the desired external surface, we have no choice but to define a protected volume using a Cutout feature. To obtain the desired internal surface, we have to define protected volumes External Reserved Area Profile. Internal Details. Internal Reserved Area External Details. Define the volume to be Cut.  To define the volume select the Base_Rectangular and Extrude it. Method : At distance. First length: 40mm. Draft from profile: 2deg. Global Shell Specifcation. Reserved Space outer of the volume. Screw Protected Volume. The Screwhead Protected Volume. Airing Protected Volume. Adding Ribs. Adding Ribs. Define the Volume to be Added.  To define the volume select the Reinforcement and Extrude it. Method : At distance. First length: 30mm. Second length : -15mm. Draft from first limit : -2deg. Radius : 0.5mm ( lateral and second ). Thickness : 2.5mm. Behavior : Added. Define a protected area.  To define the protected area select Inner_pocket. Method : At distance. First length : 60mm. Second Length : -25mm. Define a protected volume.  To define the volume select the inner_pocket airing and Extrude it. Method : At distance. First length : 97.5mm. Second Length : -76.65mm. Protected Volume. Define a protected volume.  To define the volume select the inner_pocket_2 and Extrude it. Method : At distance. First length : 100mm. Second Length : -97mm. Protected Volume. Define a protected volume.  To define the volume select the front_pocket and Extrude it. Method : At distance. First length : 40mm. Mirrored extent. Protected Volume. Define a Boss volume.  To define the volume select the Back