STAR-CCM+中的大涡模拟在工业流动预测中的应用.pdf

Aspects of Industrial Flow Prediction Using LES in STAR-CCM+ A D Gosman CD-adapco Japan STAR Conference 2012, Yokohama INTRODUCTION 1. Motivation for and nature of LES 2. LES and hybrid variants (in STAR-CCM+) 3. Quality assessment criteria 4. Best practices 5. Validation 6. Industrial applications LES AND ITS ADVANTAGES • turbulent flows unsteady and have wide range time & length scales LES • RANS models effects of all scales, and ACTUAL enables calculation of ‘mean’motion at RANS low cost, but with loss of accuracy • DNS can capture all scales, but is very expensive • LES models only small scales (<∆ ), at c moderate cost and greater accuracy. LES/DES DEVELOPMENT IN STAR-CCM+ COLLABORATIONS WITH LEADING RESEARCHERS 1. University of Manchester: Prof D Laurence 2. Penn State University: Prof D Haworth 3. Cornell University: Prof. S Pope 4. Iowa State U.: Prof P Durbin 5. TU Darmstadt: Prof. Janicka 6. University Modena: Prof. S Fontanesi PARTICIPATION IN EU PROJECTS (ATAAC, WALLTURB, ADVANTAGE) JOINT PROJECTS WITH INDUSTRIAL PARTNERS BASIC EQUATIONS Navier-Stokes Equations Filtered Equations Eddy viscosity modelling for subgrid stresses, LES Equations SUBGRID MODEL OPTIONS IN STAR-CCM+ - I 1. SMAGORINSKY Eddy viscosity æ ¶ u ö • 1 ¶ ui j , strain rate tensor S = ç + ÷ ij ç ÷ 2 ¶x ¶x è j i ø • length scale • empirical coefficient