喷粉工艺在工程机械方面应用.pptVIP

Your global partner for high quality powder coating * 使用粉末涂装结论 优点 缺点 “零”溶剂、环保没有溶剂的成本浪费 95%回收利用，经济 自动机械化，更高的生产效率 减少生产时间及生产车间面积 涂装操作、培训简单，控制性强 耐候性及防腐性能更优异(耐刮磨，遮盖能力强) 减少火灾危险 降低操作者的健康威胁 没有空气污染 无污水沉淀问题 清洁 “烘烤温度-需要更高的烘烤温度及时间（180°C*15Min） 需要一定规模专业的涂装设备使用粉末涂料适应性 * Your global partner for high quality powder coating * 我们的愿景 减少操作工人 -50% 降低涂装成本 -25% 提高生产产能 35% 减少厂房面积 -20% 新材料,新工艺 为企业带来更多利润 为员工带来更好工作环境 为子孙带来更好的未来 为社会带来更少负担 为地球带来更好环境 * * * * * machinery engineering association * Xuzhou Construction Machinery Group * machinery engineering association * * This data is from a Durr environmental audit of the BMW Spartanburg paint shop. This is for a traditional liquid paint line. For the purposes of this model the energy costs for solvent versus water borne coatings are the same. The key point is that the energy cost for the spray booth is double that of the curing ovens. This is because of the air conditioning cost. To condition air it must be cooled, to remove the water then heated to the correct temperature. Both processes involve energy. Once the air has been in the booth it picks up either water or solvent and thus must be exhausted. This means that all new air into the booth must be conditioned from start (there is no recycling). In the case of powder the air can be filtered then returned to the booth. This means that the air conditioning costs are significantly reduced. BMW estimate that powder booths only require 20% the air makeup (with the associated energy savings) of liquid booths. This factor will be worked into the comparative costing models. Your global partner for high quality powder coating * Spec for China ACE Market规格氙灯加速老化测试Xenon Arc Lab weathering Powder Coatings Technology Center∣PTC * Steel pre-treatment 钢板的前处理 Standard(标准级) Superior(高级) SANY Liquid Paints* Fe-P Zn-P e-coat APP120 Fe-P Zn-P e-coat APP120 Bright Shades: similar to RAL1016; RAL1018; RAL2001; RAL