基于纤维模型的超高层钢筋混凝土结构弹塑性时程分析及工程应用-.docVIP

基于纤维模型的超高层钢筋混凝土结构弹塑性时程 分析及工程应用 韩小雷1,2陈学伟1林生逸1何伟球1 郑宜1 吴培烽1毛贵牛1 (1. 华南理工大学高层建筑结构研究所广州 510640;2.华南理工大学亚热带建筑科学国家重点实验室广州 510640 [摘要]基于纤维模型理论利用PERFORM-3D软件实现了复杂超高层建筑结构的弹塑性时程分析并进行构件变形性能评估。针对PERFORM-3D建立高层结构模型的复杂性,开发了PERFORM-3D前处理程序ETP使之能够方便地准确地建立弹塑性模型。分析表明,基于纤维模型的整体结构弹塑性分析法是一种高效可行的方法,不但宏观上得到结构整体响应,而且微观上得到构件内力及变形和纤维的应力及应变。通过工程实例,得到整体结构响应、构件的变形及结构能量耗散情况,研究按我国现行规范进行设计的超高层混凝土结构在罕遇地震作用下的非线性变形及受力特点。 [关键词]弹塑性时程分析 PERFORM-3D 超高层结构基于性能阻尼 Inelastic Time-History Analysis and Engineering Application of Super High-Rise RC Building Structure Based on Fiber Model /Han Xiaolei1,2, Chen Xuewei1, Lin Shengyi1, He weiqiu1, Jack Cheang1, Wu Peifeng1, Mao Guiniu1(1 Tall Building Structure Research Institute, College of Architecture and Civil Engineering; 2 Key Laboratory of Subtropic Architecture Ministry of Education, South China University of Technology, Guangzhou 510640, China Abstract:Inelastic time history analysis and component deformation performance evaluation of complex super high-rise building structure can be realized by the program PERFORM-3D based on the theory of fiber model. In order to reduce the complexity of tall building structure modeling, a pre-processing program named ETP is proposed in this paper. The research showed that inelastic analysis of the whole structure based on fiber model is a efficient and successful method. In macro sense, the response of the whole structure can be gained. And in micro sense, component internal force and deformation as well as the stress and strain of the fiber can be gained. Combining with engineering example, the results of the whole structure response, component deformation and energy dissipation can be used for the research of the inelastic deformation and stress characteristics of the super high-rise building structure designed according to current codes under rare earthquake. Keywords: inelastic; time-history analysis; PERFORM-3D; super high-rise building structure; Performance-based 1 前言 基于性能的抗震设计方法是抗震设计的一个新的发展方向,它的特点是使抗震设计从宏观定性的目标向