ACI 117M-10 (R2015) 混凝土结构和材料公差规范和评注.pdf

ACI 117M-10 (Reapproved 2015) (metric) Specification for Tolerances for Concrete Construction and Materials (ACI 117M-10) and Commentary (ACI 117RM-10) An ACI Standard Reported by ACI Committee 117 Printing June 2015 American Concrete Institute® Advancing concrete knowledge Specification for Tolerances for Concrete Construction and Materials and Commentary Copyright by the American Concrete Institute, Farmington Hills, MI. All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ACI. The technical committees responsible for ACI committee reports and standards strive to avoid ambiguities, omissions, and errors in these documents. In spite of these efforts, the users of ACI documents occasionally find information or requirements that may be subject to more than one interpretation or may be incomplete or incorrect. Users who have suggestions for the improvement of ACI documents are requested to contact ACI. Proper use of this document includes periodically checking for errata at /committees/errata.asp for the most up-to-dat