AWWA C206-17 钢水管的现场焊接.pdf

ANSI/AWWA C206-17 (Revision of ANSI/AWWA C206-11) ® AWWA Standard Field Welding of Steel Water Pipe Effective date: April 1, 2017. First edition approved by AWWA Board of Directors Jan. 10, 1946. This edition approved Jan. 14, 2017. Approved by American National Standards Institute Nov. 1, 2016. SM Copyright © 2017 American Water Works Association. All Rights Reserved. AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a specification. AWWA standards describe minimum requirements and do not contain all of the engineering and administrative information normally contained in specifications. The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user, the product or service is not fully defined. AWWA pub- lication of a standard does not constitute endorsement of any product or product type, nor does AWWA test, certify, or approve any product. The use of AWWA standards is entirely voluntary. This standard does not supersede or take precedence over or displace any applicable law, regulation, or code of any governmental authority. AWWA standards are intended to represent a consensus of the water industry that the product described will provide satisfactory ser- vice. When AWWA revises or withdraws this standard, an official notice of action will be placed on the first page of the Official Notice section of Journal – American Water Works Association . The action becomes effective on the first day of the month following the month of Journal – American Water Works Association publication of the official notice. American National Standard An American National Standar