吸尘器塑料拉手注塑模设计说明.docVIP

. .. .. . PAGE .下载可编辑. . .. .. . .下载可编辑. 吸尘器注塑拉手注塑模设计 机械设计制造及其自动化 机自 指导教师 摘 要 拉手注塑模具设计说明书主要阐述了基于CAD技术的塑料拉手注塑模具的设计、制造、及其工艺方案的制定，并且着重介绍了注射加工方法、模具的结构及模具零件的设计制造，用Pro/E软件在对零件进行受力分析，以及运动分析、干涉检查。然后用Pro/E的Manufacture\Mold模块进行模具设计，包括流道及冷却水道设计，部分电极可以在装配块里设计。在此基础上可以很好地控制电极对应零件的位置关系，并利用软件的功能进行干涉检查，可以减少了设计上的失误。目前模具行业已比较成熟，很多零件日趋标准化，可以直接从市场上购买到，所以本次主要设计项目是零件型腔的设计、制造及其工艺，基于所设计制品结构较复杂，所以将模具设计为一模一腔。在本论文中还对生产工艺方案作了初步分析探讨。 关键词： 注射 模具结构 制造工艺 生产方案 The design of handgrip plastic mold basic on CAD Abstract The designs of handgrip plastic mold include the design, manufacture and process project of plastic handgrip injected plastic mould. We especially introduce the injecting technique and the design and manufacturing of mould configuration. We analyses the force of the work piece and its movement intervene suspect by Pro/E software. Then we contrive the die by the manufacture mold module of Pro/E, including the design of cold channel, and also some design of electrode. So we can control the poison relationship between electrode and its corresponding work piece, so that we could reduce the mistake in the design. Recently the mold industry is pretty advanced much accessory are becoming standard. They could be bought from market directly. So the major mission is to design the atrium of the work piece and manufacturing and process. As the production is really complex, we design the mould as one mould and one atrium. In this paper, we also discuss the manufacturing process. Keywords inject the configuration of mould manufacturing process produce project 目录 TOC \o 1-3 \h \z \u 1绪论 1 1.1课题的研究背景 1 1.2课题的研究目的 2 1.3课题研究的主要内容 2 2注塑模具的简介 3 3产品工艺性 4 4工艺方案及设计方法 6 4.1模具工艺方案 6 4.2设计方法 7 5模具设计方案 8 5.1型腔布局以及分型面选择 8 5.2排溢系统的设计 8 5.3成型零件的设计 9 5.3.1凹模的设计 9 5.3.2型芯的设计 9 5.3.3成型零件工作尺寸的计算 9 5.3.4模具型腔侧璧和底板厚度计算 10 5.3.5塑件的结构和斜度 11 5.3.6成型零件的强度计算 12 5.3.7定模的设计 12 5.3.8型腔和型芯工作尺寸计算