TP5000 English Data Sheet拓微原厂规格书.pdf免费

南京拓微集成电路有限公司 NanJingTopPowerASICCorp. TP5000 (2A switching 4.2Vlithiumbattery / 3.6V TP5000 (2A switching 4.2Vlithiumbattery / 3.6V TTP(22AAsswwiittcchhiinngg44..22VVlliitthhiiuummbbaatttteerryy//33..66VV LiFePO4 Charger) LiFePO4 Charger) LLiiFFeePPOO44CChhaarrggeerr)) Description TP5000 isa switching buck single manganese lithium battery/ LiFePO4 battery charge management chip. Its QFN16 ultra-compact package with simple peripheral circuit, making the TP5000 is ideal for portable equipment large current charging management applications. Meanwhile, TP5000 built-in input overcurrent, undervoltage protection, over temperature protection, short circuit protection,battery temperature monitoring, reverse batteryprotection. TP5000 has a wide input voltage, divided into three stagesTrickle pre-charge, constant current, constant voltage trickle charge the batterypre-charge current, constant current charging current adjusted through an external resistor, the maximum charging current of 2A. TP5000 switching frequency of 800kHz 5 operating mode so that it can use smaller external components and smaller 0 heat remains in the high current charging. TP5000 Built-power the PMOSFET, 3 anti-intrusion circuit, so there is no need anti-intrusion perimeter protection 3 Schottky diodes. TP5000 constant current function can also be used dry 1 batteries in2 strings oflithium batteries or 4 string input, constant current drive 5 0.5-7Wwhite LED. 3 2 8