LN2054_E南麟原厂规格书.pdf免费

LN2054 Standalone Linear Li-Ion Battery Charger with Thermal Regulation ■ General Description ■ Features The LN2054 is a complete constant-current /constant  Programmable Charge Current Up to 500mA -voltage linear charger for single cell lithium-ion batteries.  No MOSFET, Sense Resistor or Blocking Diode Its ThinSOT package and low external component count Required make the LN2054 ideally suited for portable applications.  Complete Linear Charger in ThinSOT Package for Furthermore, the LN2054 is specifically designed to work single Cell Lithium-Ion Batteries within USB power specifications.  Constant-Current/Constant-Voltage Operation with No external sense resistor is needed, and no blocking Thermal Regulation to Maximize Charge Rate diode is required due to the internal MOSFET architecture. Without Risk of Overheating Thermal feedback regulates the charge current to limit the  Charges Single Cell Li-Ion Batteries Directly from die temperature during high power operation or high USB Port ambient temperature. The charge voltage is fixed at 4.2V,  Preset 4.2V Charge Voltage with 1% Accuracy and the charge current can be programmed externally with  Charge Current Monitor Output for Gas Gauging 5 a single resistor. The LN2054 automatically terminates the  Automatic Recharge th 0 charge cycle when the charge current drops to 1/10 the  Charge Status Output Pin 3 programmed value after the final float voltage is reached.  C/10 Charge Termination 3