XT2051_E南麟原厂规格书.pdf免费

XT2051 1.0A Compatible With The USB Interface, Linear Battery Management Chip ■ General Description ■ Features The XT2051 is a constant- current / constant- voltage  Programmable charge current up to 1A charger circuit for single cell lithium-ion batteries. The  No MOSFET, sense resistor or blocking diode device includes an internal power transistor, does not need required external current sense resistor and blocking diode in  Complete linear charger in small package for single applications. XT2051 requires minimal external cell lithium-ion batteries components, and meet the USB bus specification, is very  Constant-current/constant-voltage operation with suitable for portable applications in the field. thermal regulation to maximize charge rate without Thermal modulation circuit can control the internal risk of overheating chip temperature in a safe range when the device power  Charges single cell li-ion batteries directly from USB dissipation be relatively large or the ambient temperature port be higher. Within a fixed constant charge voltage 4.2V, can  Preset 4.2V also be adjusted by an external resistor. Charge current set  Monitor output charge current 5 by an external resistor.  default charging voltage of 4.2V1%, can be adjusted 0 When the input voltage (AC adapter or USB power by the FB 3 supply) power is lost, XT2051 automatically enters a low  Automatic recharge 3 power sleep mode, then the battery current consumption is  Ch