fme转换器中文说明.docVIP

Transformer Quick-Reference – FME 2006 GB For detailed information on transformers, open the Workbench Help file and find the Transformers folder. Transformer Brief Description 简介（注意并非针对本文，可能有差异） Replaces the geometry of the feature with a two-dimensional arc whose shape is 改为二维圆弧，圆弧的形状由参数控制，例 2DArcReplacer set by the parameters, which can be either constant floating point values or the 如常数或属性值 values of existing attributes. Replaces the geometry of the feature with a two-dimensional box whose minimums 改为二维矩形，矩形的最大最小坐标为指定 2DBoxReplacer and maximums are fixed val-ues, or are taken from attributes in the original 的常数或原始要素的属性值 feature. Creates a two-dimensional feature using the parameters supplied, and sends it into 2DCreator 根据参数创建二维要素，并输入转换流程 the workspace for processing. Replaces the geometry of the feature with a two-dimensional ellipse whose shape 2DEllipseReplacer 改为二维椭圆，椭圆的形状由参数控制 is set by the parameters. Removes any elevation (Z) coordinates which may (or may not) have been present 2DForcer 改为二维要素（删除Z坐标） on the original feature. Creates a grid of two-dimensional point features, at the origin and using the offsets 按格网方式生成一批二维点状要素，须指定 2DGridCreator specified. 原点和间距 Replaces the input features with a grid of two-dimensional point features that have 将输入的一批要素改为按格网方式生成的二 2DGridReplacer the specified spacing, and which cover (at least) the bounding box area of all the 维点状要素，格网的范围（至少）覆盖全部 features that enter the transformer. 输入要素的外接矩形，格网间距须指定 Adds a two-dimensional point as the last vertex of the feature. The ordinates are 给要素增加一个二维的节点（最后一个节 2DPointAdder taken from attributes in the original feature. 点），其坐标由原始要素的属性获得 Replaces the geometry of the feature with a two-dimensional point whose ordinates 改为二维的点，其坐标由原始要素的属性获 2DPointReplacer are taken from attributes in the original feature. 得 Replaces the geometry of the feature with a two-dimensional arc whose shape is 改为二维圆弧（注：原文如此），圆弧的形 3DArcReplacer set by the parameters, which can be either constant floating point val