组合体尺寸注法研究报告.pptVIP

Basic requirements for dimensioning 标注尺寸的基本要求 Dimensioning of basic body, cutting and interpenetration bodies 基本体、截切体及相贯体的尺寸注法 Dimensioning general composite solids 组合体的尺寸注法 Exercises 练习题; Reasonableness:The dimensions must be marked according to the requirements of design, manufacture and test. 合理： 所注尺寸要符合设计、制造和检验等要求。;Each dimension of the part should mark on the drawing only once. It should also be marked on a drawing that most clearly represents the corresponding constructs. 机件的每一尺寸, 在图上只标注一