瓶口螺纹标准.docVIP

瓶口螺纹标准 Cap and Neck Finishes ? Screw thread cap sizes are generally expressed as two numbers、 The first number refers to the cap diameter (in millimeters) and the corresponding Glass Packaging Institute (GPI)/Society of the Plastics Industry (SPI) finish diameter、 ? The second number refers to the height and thread configuration of the closure or finish、 Below is a selection of commonly used caps and finishes、 　 S=Thread Start H=Finish Height T=Major Diameter E=Minor Diameter I=Hole Diameter T - Outside diameter of the continuous thread E - Outside diameter of the finish shaft excluding thre