g040123伺服阀检测仪说明书.pdfVIP

APPLICATION NOTES VALVE CHECKER G040-123 伺服阀检测仪说明书 型号G040-123 翻译：许国超 本文件供参考 2010年6月 CONTENTS 目录 Chapter Title Page 扉页 1. Description 3 产品描述 3 2. Specification 7 规格说明 3. Quick Start 9 快开 4. Connecting to valve and plant 11 阀的设备连接 5. Plant mode operation (in line) 12 工作模式操作（在线） 6. Checker mode operation (stand alone) 15 检测模式操作（离线独立） 7. External 24V supply 17 外部供电24V 8. Valve performance checks 18 阀性能检测 9. Block diagram 20 流程图 DESCRIPTION 产品描述 1.1 The Moog G040-123 Valve Checker is an instrument capable of checking the flow control function of nearly the complete range of Moog electrical feedback (efb) proportional and servo valves. Mechanical feedback (mfb) and pressure control valves are not catered for by the G040-123. 穆格 G040-123型伺服阀监测仪是一种能对穆格阀就近能对阀的流量控制，比例 阀和伺服阀电气信号反馈检测的仪器。带机械反馈的压力控制阀不能用G040-123型 检测仪。 The feature that makes it so versatile is the way it can test a valve while the valve is still installed in its normal operating plant. This is done at two levels, “in line” and “stand alone”. 这种仪器特点能对安装在阀台上正常工作的阀门进行多方面的检测和操作。这里 有两种测试方式：在线检测和独立检测。 1.1.1 Plant (In Line) 工厂工作（在线检测） As in fig a) the plant and valve operate normally. In fig b) the Valve Checker is connected between the plant electronics and the valve such that all the plant electronics’ signals, to and from the valve, are connected as normal. The Valve Checker monitors the plant electronics’ signals and the signals back from the valve, enabling a