欧洲经委会（ECE）汽车标准法规： R12-03S-3S-C4.pdfVIP

E/ECE/324/Add.11/Rev.3/Corr.4−E/ECE/TRANS/505/Add.11/Rev.3/Corr.4 14 February 2011 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions* (Revision 2, including the amendments which entered into force on 16 October 1995) Addendum 11: Regulation No. 12 Revision 3 – Corrigendum 4 Corrigendum 4 to Revision 3 of the Regulation, subject of Depositary Notification C.N.817.2010.TREATIES-3 dated 23 December 2010 Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact UNITED NATIONS * Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.11- E/ECE/324/Add.11/Rev.3/Corr.4 E/ECE/TRANS/505/Add.11/Rev.3/Corr.4 Annex 4 , Insert a new paragraph 2.3.1., to read: 2.3.1. Following are non mandatory additional guidelines for mechanical properties of the bodyblock: (a) Rate of loading during stiffness measurement: 250 ± 50 mm/min; (b) Centre of gravity: 551.2 ± 6 mm from top of the bodyblock; (c) Moment of ine