hypermesh网格质量检测1.pdfVIP

HyperMesh HyperMesh Tutorials Quality Checking and Editing Mesh - HM-3300 1/12 Checking and Editing Mesh - HM-3300 In this tutorial, you will learn how to: • Identify shell element connectivity problems • Correct shell element connectivity problems • Review the model’s shell elements to ensure connectivity problems were corrected • Remesh the elements along the rib Exercise This exercise uses the model file, cover.hm. Step 1: Retrieve and view the HyperMesh model file. Open the file cover.hm located in the installation folder\tutorials\hm directory. Step 2: Review the model’s free edges to identify shell element connectivity problems. 1. Access the edges panel in the following ways: • From the Menu Bar, select Mesh, then select Check, then Components, then Edges • From the main menu, select the Tool page, and then click edges file:///D:/Program/HyperMesh/help/hm/hm3300.htm 2014/9/3 HyperMesh HyperMesh Tutorials Quality Checking and Editing Mesh - HM-3300 2/12 • Press the SHIFT+F3 keys 2. With the comps selector active, click any element in the graphics area. The component containing the element is selected. 3. Click find edges. Red, 1-D elements are displayed. They are organized into the new component named ^edges. A red 1-D element is created along each shell element edge that is free; one or more of the element edge’s nodes is not shared by the adjacent elements. Note: For a component name whose first character is ^, the component and its contents is not written to the input file when the model is exported. 4. Click Shaded Elements and Mesh Lines ( ). 5. Observe the red, 1-D elements (free edges). 6. Try to identify gaps in the continuity of the mesh. Hint: Loo