出货检验报告-中英文版.docxVIP

Outgoing Quality Control Report Inspection Date: Customer Order No. Product Name Name Specification Total Result :□ NG NOT GOOD □ OK Production Quantity Sampling Sampling Inspection Instruction Standard: Quality CR:(CRITICAL) 0 MA(MAJOR):0.4 MI(MINOR):1.0 Requirement： 一、 Visual and Dimensional Inspection No. Parts Inspection Items Inspection Test equipment Defect Results Remark Method NG OK Unacce ptable 1 Outside 1.1 Damage/ Dirt Visual Visual Carton Inspection Inspection 1.2 Length* Width* Check it up Calipers Height with BOM 1.3 Check it up Visual Content/stickiness/damage with data Inspection of the tags 2 Inner 2.1 Damage/ Dirt Visual Visual Box Inspection Inspection 2.2 Length* Width* Check it up Calipers Height with BOM 2.3 Check it up Visual Content/stickiness/damage with data Inspection of the tags 2.4 Package Check it up Visual with order Inspection 3 Ontolog 3.1 Visual Visual y color/appearance/cleanline Inspection Inspection ss 3.2 Seize of the lamp Check it up Calipers with BOM 二、 Test No. Inspection Inspection Method Standard Actual Test equipment Defec Results Remark Items Paramet er 4 Aging Test Under the punch of aging machine ﹥ 4H 5 Puncture Under the punch of aging Test machine﹥ 4H 6 Power The use of power meter+ — 1W 6 Color The same as customer ’ s Temperatu requirement re 7 CRI The same as customer ’ s requirement 8 Angle The same as customer ’ s requirement Inspector：  t NG OK Unac cepta ble Aging Machine Aging Machine Power Meter Integrating Sphere Integrating Sphere Integrating Sphere 出货检验报告 检验日期： 检验员  QC： 客户名称  定单号  产品名称 产品规格  生产总数  结论：□  NG  □ OK Inspection 抽样检验指导书 Standard 质量要求：致命瑕疵（ CR:0) 严重瑕疵（ MA:0.4 ）轻微瑕疵（ MI:1.0 ） 一、外观尺寸检验 序号 部 检验内容 检查方法 检验设备 缺 点 检验结果 说明 位 别 NG OK 不 接 受 1 外 1.1 外箱表面破损、脏污 目测 目测 箱 1.2 外箱的长 *宽*高 与 BOM 表核对 卷尺 1.3 贴纸内容、粘性、破损 与数据检验 目测 2 内 2.1 内盒表面破损，脏污 目测 目测 盒 2.2 内盒的长 *宽*高 与 BOM 表核对 卷尺 2.3 贴纸内容、粘性、破损 与数据检验 目测 2.4 内盒包装物 与定单核对 目测 3 本 3.1 颜色、外观、洁净度 目测 目测 体 3.2 整灯的尺寸 与 BOM 表核对 卡尺 二、测试检验 序号 检验内容 检查方法及