JSB-11腔体配合件数数控加工工艺及编程.docVIP

JSB-11腔体配合件数数控加工工艺及编程 摘 要 数控技术，是采用数字控制的方法对某一工作过程实现自动控制的技术。 它所控制的通常是位置、 角度、 速度等机械量和与机械能量流向有关的开关量。 数控的产生依赖于数据载体和二进制形式数据运算的出现。而数控铣床是在普通铣床上集成了数字控制系统，可以在程序代码的控制下较精确地进行铣削加工的机床。 本文为配合零件的编程与加工，通过数控铣床的加工，针对具体的零件， 进行了工艺方案的分析，加工方案的确定，刀具和切削用量的选择，确定加工顺序和加工路线， 数控加工程序编制。 本文主要从三维模型的建造、加工工艺分析和机床编程的一般步骤着手， 提高我对 CAD/CAM 软件的使用与认识、 提高我的读图绘图能力。最后通过自动编程与加工，希望能在过程中发现更好的编程方法和加工方法，提高效率，而且运用于实际工作中能够更深入的了解数控机床的加工特点。 随着我国综合国力的进一步加强和加入世贸组织。我国经济全面与国际接轨，并逐步成为全球制造中心，我国企业广泛应用现代化数控技术参与国际竞争。 数控技术是制造实现自动化，集成化的基础，是提高产品质量，提高劳动生产率不可少的物资手段。 关键词：腔体；配合件；数控加工 Abstract Numerical control technology, is the use of digital control method for a certain process of automatic control technology. It usually controls the position, Angle, speed and other mechanical quantities and the flow of mechanical energy related to the switch quantity. The production of numerical control depends on the emergence of data carrier and binary data operation. CNC milling machine is in the ordinary milling machine set into a digital control system, can be controlled in the program code more accurate milling machine. In order to cooperate with the programming and processing of parts, through the CNC milling machine processing, for the specific parts, the analysis of the process plan, the determination of the processing plan, the choice of cutting tools and cutting parameters, determine the processing sequence and processing route, CNC machining programming. This paper mainly starts from the construction of 3d model, the analysis of processing technology and the general steps of machine tool programming, so as to improve my use and understanding of CAD/CAM software and my ability of reading and drawing. Finally, through automatic programming and processing, I hope to find better programming methods and processing methods in the process, improve efficiency, and can be used in the actual work to have a deeper understanding of the machining characteristics of CNC machine tools. With the further strengthening of Chinas comprehensive nation