CE_2012_45525样品测试报告SGS.pdfVIP

測試報告 Test Report 號碼(No.) : CE/2012/45525 日期(Date) : 2012/05/02 頁數(Page) : 1 of 6 南亞塑膠工業股份有限公司 *CE/2012/45525* NAN YA PLASTICS CORPORATION 嘉義縣新港鄉中洋村中洋工業區2號 NO. 2, CHUNGYANG INDUSTRIAL PARK, HSINKANG VILLAGE, CHIAYI COUNTY, TAIWAN 以下測試樣品係由客戶送樣, 且由客戶聲稱並經客戶確認如下 (The following samples was/were submitted and identified by/on behalf of the client as)： 樣品名稱(Sample Description) : 6410G5ABK3 收件日期(SampleReceivingDate) : 2012/04/26 測試期間(Testing Period) : 2012/04/26 TO 2012/05/02 測試需求(Test Requested) : 依據客戶要求, 參考RoHS 2011/65/EU Annex II 指令進行鎘,鉛, 汞, 六價鉻, 多溴聯 苯,多溴聯苯醚測試. (As specified by client, with reference to RoHS Directive 2011/65/EU Annex II to determine Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs contents in the submitted sample.) 測試結果(Test Results) ： 請見下一頁 (Please refer to next pages). 結論(Conclusion) ： 根據客戶所提供的樣品, 其鎘,鉛, 汞, 六價鉻, 多溴聯苯,多溴聯苯醚的測試結果符合 RoHS指令2002/95/EC的更新指令2011/65/EU之要求 (Based on the performed tests on submitted samples, the test results of Cadmium, Lead, Mercury, Cr(VI), PBBs, PBDEs comply with the limits as set by RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.) Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at /terms_and_conditions.htm and, for electronic format documents, subject to