aspen模拟反应精馏radfrac模块.docVIP

RadFrac for Dummies: A How to Guide on Aspen Plus DISTILL FEED DIST BOTTOMS This example will show how to use Radfrac on Aspen Plus to model distillation columns. The feed shown in the diagram above will consist of 50 lbmol/hr of Methanol and 50 lbmol/hr of water. A purity of 99.5% is desired in both the bottoms and distillate product streams using a reflux ratio of 1.5. Radfrac ? SDSMT 2/35 If you don’t know how to log on to Aspen Plus, please see the “Getting Started on Aspen Plus” manual. Choose the Template Option Click “OK.” This window allows you to select a particular simulation option. For this example, select the “General with English Units” option. Also, make sure that the option in the Run Type box displays “Flowsheet” Click “OK” Radfrac ? SDSMT 3/35 Each time Aspen Plus is opened and a new file is created or an existing file is opened this login window appears. Enter Unix host for the server type, sylvan.che.sdsmt.edu for the node name, and your correct User name and Password. Click “OK” Another window will appear indicating the connection was established. Click “OK.” Aspen Plus automatically assigns labels to every stream and block. To turn this option off, click on the Tools menu in the toolbar and select Options. In the Options window, click on the folder tab labeled “Flowsheet”. Next, click on these boxes under the Stream and Block labels. The check marks in the boxes should disappear indicating that these options are disabled. Click OK when through. Radfrac ? SDSMT 4/35 To start the simulation, click on the Columns tab found in the selection of pieces of equipment. Go to the down arrow to the right of the RadFrac selection. Click on Fract1, the second picture from the left in the top row. Next, move the cursor into the white area and click on the desired position for the column. A prompt should appear asking to input the block ID, for this example “Dist” was chosen. The Feed, Distill and Bottoms streams need to be created. To create the streams, fir