iso10289盐雾判定标准.docVIP

SIS Multi User Licence: ABB TECHNOLOGY LTD.. 12/16/2009 INTERNATIONAL STANDARD ISO 10289 First edition 1999-10-15 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates — Rating of test specimens and manufactured articles subjected to corrosion tests Méthodes dessai de corrosion des revêtements métalliques et inorganiques sur substrats métalliques — Cotation des éprouvettes et des articles manufacturés soumis aux essais de corrosion A Reference number ISO 10289:1999(E) SIS Multi User Licence: ABB TECHNOLOGY LTD.. 12/16/2009 ISO 10289:1999(E) Contents Page 1 Scope 1 2 Terms and definitions 1 3 Principle2 4 Types of defect2 5 Method of inspection3 6 Assignment of ratings3 7 Test report 5 Annex A (informative) Dot charts and colour photographs for coatings cathodic to the base metal7 Annex B (informative) Dot charts for coatings anodic to the base metal17 Bibliography22 ? ISO 1999 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 ? CH-1211 Genève 20 ? Switzerland Internet iso@iso.ch Printed in Switzerland ii SIS Multi User Licence: ABB TECHNOLOGY LTD.. 12/16/2009 ? ISO ISO 10289:1999(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on al