澳洲、美国、英国、欧洲等插头图纸.doc

Appendix 1 Error! Reference source page 1 of 1 not found. (澳规)Australia integrated plug according to AS/NZS 3112:2000 for AU type H G I J 2.8 TABLE: Australia plug dimension according to AS 3112 figure 2.1 C E P Part No. Dimensions Limit Measured Pass/Fail Distance from projection part edge to L and N pins 9mm min. A Width of live pin 6.35 ± 0.15mm C Thick of live pin metal part 1.58 to 1.78mm Thick of live pin insulated part 1.58 to 1.78mm D Pin center to plug center 7.92mm F Length of live pin 17.06 ± 0.4mm F Length of live pin insulated part 8.7 ± 0.5mm G Length of plug base 27.0mm or 21.