stm32f030f4数据使用指南.doc

STM32F030x4 STM32F030x6 STM32F030x8 Value-line ARM-based 32-bit MCU with 16 to 64-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation Datasheet target specification Features Core: ARM? 32-bit Cortex?-M0 CPU, frequency up to 48 MHz Memories – 16 to 64 Kbytes of Flash memory LQFP64 10x10 mm LQFP48 7x7 mm LQFP32 7x7 mm TSSOP20 – 4 to 8 Kbytes of SRAM with HW parity checking – One 16-bit basic timer CRC calculation unit – Independent and system watchdog timers – SysTick timer: 24-bit downcounter Reset and power management – Voltage range: 2.4 V to 3.6 V – Power-on/Power down reset (POR/PDR) Calendar RTC with alarm and periodic wakeup from Stop/Standby – Low power modes: Sleep, Stop, Standby Clock management – 4 to 32 MHz crystal oscillator – 32 kHz oscillator for RTC with calibration – Internal 8 MHz RC with x6 PLL option – Internal 40 kHz RC oscillator Up to 55 fast I/Os – All mappable on external interrupt vectors Communication interfaces – Up to two I2C interfaces: one supporting Fast Mode Plus (1 Mbit/s) with 20 mA current sink – Up to two USARTs supporting master synchronous SPI and modem control; one with auto baud rate detection – Up to two SPIs (18 Mbit/s) with 4 to 16 programmable bit frame – Up to 36 I/Os with 5 V tolerant capability Serial wire debug (SWD) 5-channel DMA controller 1 x 12-bit, 1.0 μs ADC (up to 16 channels) – Conversion range: 0 to 3.6 V Table 1. Device summary Reference Part number STM32F030x4 STM32F030F4 – Separate analog supply from 2.4 up to 3.6 V STM32F030x6 STM32F030C6, STM32F030K6 Up to 10 timers STM32F030x8 STM32F030C8, STM32F030R8 – One 16-bit 7-channel advanced-control timer for 6 channels PWM output, with deadtime generation and emergency stop – One 16-bit timer, with up to 4 IC/OC, usable for IR control decoding – One 16-bit timer, with 2 IC/OC, 1 OCN, deadtime generation and emergency stop – Two 16-bit timers, each with IC/OC and OCN, deadtime generation, emergency stop and modulator gate