ASME SECTION II A-2 SA-666-2007 标准规范下载.pdf

2007 SECTION II, PART A SA-666 SPECIFICATION FOR ANNEALED OR COLD-WORKED AUSTENITIC STAINLESS STEEL SHEET, STRIP, PLATE, AND FLAT BAR SA-666 (Identical with ASTM Specification A 666-03) 07 1. Scope 4. Chemical Composition 1.1 This specification covers austenitic stainless steels 4.1 The steel shall conform to the requirements as in the annealed and normally required cold-worked condi- to chemical composition specified in Table 1, and shall tions for various structural, architectural, pressure vessel, conform to applicable requirements specified in the current magnetic, cryogenic, and heat-resisting applications. (This edition of Specification A 480/A 480M. revision of Specification A 666 replaces prior Specifica- tions A 412 and A 177.) 5. Mechanical Properties 1.2 The application of this specification, or the use of 5.1 The material shall conform to the mechanical prop- material covered by this specification does not automati-