JT桌上型除振台安装说明.PDFVIP

JT 桌上型除振台安裝說明 JT Desktop vibration isolation base 安裝前，請確認避震器之型號規格是否正確。 Before installation, make sure the model and the specification are correct. 安裝說明 Installation guide • 所需工具：氣壓源(最大使用內壓為4.5kg/cm2 = 0.44Mpa )。 Required tools: Air pressure source (Maximum inner pressure is 4.5kg/cm2 = 0.44Mpa) • 將除振台及附件自紙箱取出檢查附件是否齊全、除振台有無缺陷破損。(如圖1) Take out the vibration isolation base and other accessories from the box to check if there is any damage (Fig 1). 型 號 Type JT0405A JT0605A JT0705A JT0806A