标准规范文件：AGMA 1010-F14-2014.pdfVIP

ANSI/AGMA 1010-F14 (Revision of ANSI/AGMA 1010-E95) American National Standard Appearance of Gear Teeth - Terminology of Wear and Failure 4 1 F - 0 1 0 1 A M G A / I S N A AMERICAN NATIONAL STANDARD ANSI/AGMA 1010-F14 American Appearance of Gear Teeth - Terminology of Wear and Failure National ANSI/AGMA 1010-F14 Standard [Revision of ANSI/AGMA 1010-E95] Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respect preclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing or using products, processes or procedures not con